bingo plus update today Philippines

List of the catalogue of this article:

• 1. What is the reason for the engine fault repair station
< Li style='margin-bottom: 3px;list-style: none'>2. What's wrong with the fault emergency call function, please go to the repair station
• 3, Volkswagen Tiguan Display Engine Fault Repair Station
• 4、Where to repair car engine failure
• 5,bingo plus update today Philippines Engine fault light is on, go to 4s store or repair shop

The reasons for these fault lights can be divided into two categories: engine electrical faults: such faults include some sensor damage, such as air flowmeter, throttle idling motor, intake pressure sensor, oxygen sensor, ignition coil, spark plug, water temperature sensor, crankshaft position sensor or camshaft Position sensor, etc.

Remind the driver that the engine is faulty. You need to go to the nearest repair shop for testing and maintenance.

This situation should be the problem of the throttle body itself. Do the throttle matching first, and then try [If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.

There is a problem with the gasoline you added or the engine accumulates too much carbon, resulting in poor combustion of the engine, which may cause the fault light to turn on.

Some sensor computer boards themselves fail to cause the light to turn on. When the fault light is on, the engine does not shake or shakes slightly. At this time, the owner does not need to worry when using it. It can be used normally. When it has time or convenience, he can go to the car repair shop to use the computer detector first, directly read the fault code, and repair it according to the fault code definition.

Analysis of the reasons for the abnormal display of the engine oil pressure indicator: When the pointer of the gauge shows abnormal oil pressure, it means that the engine parts are faulty.

Fault emergency call function, please go to the repair station

According to the query Volkswagen According to the official website, Volkswagen SOS emergency call please go to the repair station refers to Volkswagen's emergency call system. When a Volkswagen encounters an emergency or needs repair, it can use the system to make an emergency call and request to go to the repair station for repair.

The reason for the failure of the Volkswagen sos emergency call function; the software version is too low; solution: upgrade to the 4S store; during assembly, the sponge-like object enters the antenna; solution: replace the new sos device; the control unit is damaged due to the defect of the control unit software version.Solution: Upgrade the software version of the control unit.

System failure: Your Volvo XC60 may have a system failure, causing the eCall system to not work properly and needs to be repaired. Maintenance expiration: The eCall system used by XC60 needs to be maintained and updated regularly to ensure its performance, reliability and security.

The mobile phone prompts "emergency call". There are generally several reasons for this situation: it is possible that the mobile phone card does not match the mobile phone; the mobile phone card has been damaged, it is recommended that you bring valid documents to the business hall to handle the card replacement business; poor contact with the mobile phone or your location is a signal blind area or suddenly there is no letter. Caused by the number.

Volkswagen Touareg displayMotor failure maintenance station

How to solve the engine failure of SAIC Volkswagen Touareg First, check the water temperature gauge and oil pressure warning light. If the water temperature gauge and the oil pressure alarm light do not alarm, the car can still drive, but at this time, you must pay attention to controlling the speed and drive to the repair station for inspection in time.

Oxygen sensor failure: The oxygen sensor is used to monitor the combustion status of the engine. If it fails, it may cause the engine failure light to light up.

Cause of engine failure: 1. Common faults of oxygen sensors. If the oxygen sensor is damaged or the power plug of the sensor is damaged or loose, or the air mixture is too thin or too thick, the fault light will light up. The quality of gasoline used in the car is poor and unqualified.

You can go to the repair shop for sexual maintenance. The solution to observe the engine fault light is as follows.The exhaust emissions do not meet the standard. For example, poor fuel, ternary catalyst failure, excessive carbon accumulation in the intake pipe, blockage of fuel injector, oxygen sensor failure, occasional engine lack of fire, etc. will all cause the engine fault indicator light to light up.

Where to repair the car engine failure

1. In case of engine failure, you should park on the side or drive to the nearest service area, observe the engine status self-checking light, observe whether the engine coolant temperature is too high, check Check whether the engine lacks oil and observe whether the engine is running smoothly. If the above conditions exist, you need to go to the nearest auto repair shop for repair.

2. S stores or repair shops are fine. It's just that the price is a little different.

3Hello, the engine fault light only prompts that the engine control circuit is faulty, and there is no clear definition of the fault. It needs to be tested with a diagnostic instrument to obtain the accurate fault code and fault site. It is recommended to go to the repair shop for inspection and maintenance. I hope I can help you.

4. The engine light is yellow. If there is no obvious abnormality in the engine, we can reset it by restarting the engine. If the restart fails, we can also reset it by trying to unplug the power supply or fuse.

5. Park the car on the side. After 5-10 minutes of turning off the engine, do not step on the brake, press the start button directly, or just rotate the car key half a turn to the on position without stepping on the clutch. The self-test function will be turned on after the car is turned on. After 5-10 seconds, observe whether the fault light on the dashboard is off, only The remaining engine fault light.

6. If the car has an engine idling failure, you should find a professional for repair. The starter, also known as the electric motor, converts the electrical energy of the battery into mechanical energy, drives the flywheel of the engine to rotate and start the engine. According to the working principle, starters are divided into DC starters, gasoline starters, compressed air starters, etc.

Go to the 4s store or repair shop when the engine fault light is on

1. Start and turn off the vehicle three times in a row. Turn off the ignition and pull out the negative pole of the engine battery, wait for 30 seconds to connect it, and then try to start. It can be eliminated after using the fault detector to troubleshoot at the 4S store.

2. It's all right. If there are other fault lights on all the time, you need to go to 4S.The store or repair shop overhauls the corresponding modules and parts. If only the engine fault light is always on, turn on the car again and observe whether the engine fault light is still on.

3. This may be caused by the failure of the fuel pump or ignition parts. It is recommended to go to the 4S store to repair the fuel pump or ignition parts; the engine fault light is on, and the vehicle can drive, but there are symptoms such as severe shaking and weak acceleration. In the face of this situation, pull over and call for help; the fault light is on, but there is no abnormality in driving. This may just be a sensor failure.

4. If the red light is on, go to the 4S store for inspection and repair immediately. The fault is very serious. If the yellow light is on, the fault may not affect the driving, but you should also check it as soon as possible. The internal reason why the engine fault light is on: poor fuel quality, unclean inside of the engine cylinder, and carbon accumulation.

5. There are many reasons why the engine turns on the fault light, and you need to go to the 4s store or repair shop for inspection and repair. After the fault light is turned on, it may be a failure of the sensor or a mechanical failure of the engine itself, and the fault code needs to be read by a diagnostic computer. The reason why the engine fault light turns on: the sensor fails.