DigiPlus

win7 installation of Black Apple tutorial Black Apple refers to the Apple Mac OS X operating system on DigiPlusnon-Apple-branded computers. Installing Black Apple allows non-Apple computers to experience the advantages and features of the Mac OS X system. However, because Black Apple is not an officially supported operating system, the installation process is more complicated than installation on Apple devices and prone to various problems such as incompatibility and driver mismatch.In this article, we will introduce how to install Black Apple on the win7 system. Step 1: To obtain the Mac OS X system image file, you first need to obtain the Mac OS X system image file, which can be purchased from the Apple official store or searched and downloaded on the Internet. It should be noted that the Mac OS X system image files downloaded from the Internet may have security risks. It is necessary to ensure that the downloaded files come from trusted websites, and try to download the official original system files. Step 2: Making a boot USB flash drive is a necessary step to install Black Apple. First of all, you need to prepare a USB flash drive with a capacity of not less than 8G, format the USB flash drive into FAT format, and then use third-party tools to write the mirror file to the USB flash drive. Here I recommend an easy-to-use and commonly used black apple making tool: UniBeast.UniBeast can help you convert your Mac OS X system into a USB boot disk, which is simple and practical to operate. Step 3: Setting BIOS is one of the important steps to install Black Apple. You need to set the BIOS of the computer correctly and enable UEFI mode. The specific operation steps are as follows: 1. Press F2 or Del to enter the BIOS setting interface 2. Find the Boot Settings tab 3. Enable UEFI mode and set the USB flash drive as the first startup item 4. Save all settings and restart the computer. Step 4: Install the Mac OS X system. After the BIOS setting is completed, restart the computer. At this time, you should be able to boot from the USB flash drive to the Mac OS X system installation interface. Install the system according to the interface prompts. At this time, you need to select the corresponding language, time zone, keyboard layout and formatting disk and other options.Because Black Apple needs to use a special boot method, it chooses to install the booter Clover, which can solve most hardware compatibility and driver problems. Step 5: After the installation of the configuration system is completed, the system configuration and settings are required, including the installation and setting of network connection, sound card, graphics card, network card and other drivers. These drivers can be obtained through Internet search. It should be noted that the driver version used by Black Apple needs to match the installed system version, otherwise there may be incompatibility and driver mismatch. At the same time, before installing the driver, back up the system files to prevent unexpected situations. In summary, through the above five steps, Black Apple can be successfully installed on the win7 system. During the installation process, you need to pay attention to some details to avoid abnormalities due to compatibility problems between different systems.If you are installing for the first time, it is recommended to know what you need to pay attention to before installation to avoid unnecessary trouble.

Contact Us
Phone：020-83484673