Hearthstone arena

Engine thermal attenuation (engine thermal failure: how to solve it?Hearthstone arena) During the operation of a car, engine thermal attenuation is a common problem. The thermal attenuation of the engine can lead to the failure of the engine, thus affecting the performance of the car, resulting in increased fuel consumption and shortened life. This article will discuss the causes and solutions of engine thermal attenuation. Causes of engine thermal attenuation One of the most common reasons for engine thermal attenuation is that the vehicle does not have enough airflow while driving. When the car is slow or stationed, the engine cannot get enough airflow, resulting in the failure of the cooling system. ThisIn this case, the engine temperature rises sharply and the fuel consumption increases. If not handled in time, it will cause serious damage. In addition, the reason for the thermal attenuation of the engine may also be the failure of the cooling system. The cooling system consists of water pump, water tank, radiator, coolant, heat exchanger and other components. If these parts fail, the cooling system may fail, causing the engine to exceed the temperature limit, thus causing thermal decay. The solution to engine thermal attenuation usually has the following methods to solve engine thermal attenuation: to solve the cooling system problem. Engine thermal attenuation may be caused by cooling system failure. To solve this problem, it is necessary to check whether the components of the cooling system are working properly. You can check whether the pump is working normally, whether the radiator is blocked or blocked by the pipe, etc. Check the radiator. The radiator is an engine.It is an important part of the cooling system, so it is very susceptible to -road debris and sediment. If the radiator is covered by these sediments, it will not be able to remove heat from the engine, resulting in engine overheating. Therefore, it is necessary to check the radiator regularly, replace the old radiator, and clean up the dust and debris accumulated around it in time. Increase the air volume. When the engine is running, it needs a large amount of airflow to maintain normal operation. If the car is slow, such as in a traffic jam, the airflow is not enough to meet the requirements of the engine. Therefore, to solve the problem of engine thermal attenuation, you can increase the airflow by increasing the speed of the vehicle or installing a fan. Using high-quality fuel and engine oil can reduce the possibility of engine overheating. This is because of high quality.Fuel can produce a small amount of carbon and impurities during combustion, reducing engine carbonisation and other problems. At the same time, it can reduce engine heat generation and make it easier to emit. To sum up, engine thermal attenuation is a very common problem. If it is not dealt with in time, it may cause serious damage to the vehicle. The ways to solve this problem include checking the failure of the cooling system, checking the radiator, increasing the air volume, etc. In addition, the use of high-quality fuel and engine oil can also reduce the heat generation of the engine, and also reduce the problems such as engine carbonisation. Through timely maintenance and upkeep, the occurrence of engine thermal attenuation can be prevented and the performance and life of the car can be improved.

Contact Us
Phone：020-83484673