DigiPlus stock

List of the table of contents of this article:

• 1, ... Check the vehicle stability assistance system and the vehicle anti-lock braking system?
• 2, Civic check that the anti-lock system can't be ignited?
• 3、What does it mean to check the anti-lock braking system before starting the Chinese v5 car What does the brake system mean
• 4,DigiPlus stock Maintenance methods and precautions of anti-lock braking system (ABS)

... Check the vehicle stability assistance system and the vehicle anti-lock braking system?

It may be a false failure caused by inadvertent operation when parking.

At this time, you should pull over immediately. Otherwise, the vehicle may run out of control, leading to car accidents and deaths. You need to go to the car repair center to check the repair and read the fault code to eliminate it. The anti-lock braking system is an active safety system in automobiles, also known as the "ABS" braking system.

The meaning of checking the anti-lock braking system in the car is as follows: ABS "ABS" (Anti-locked Braking System) is translated into Chinese as "anti-locking braking system";It is a kind of automobile safety control system with the advantages of anti-skid, anti-lock and so on.

It not only has the braking function of the ordinary brake system, but also prevents the wheel from locking, so that the car can still turn in the braking state, ensure the stability of the braking direction of the car, and prevent side slippage and deviation. It is the most advanced and best braking device on the car at present.

Civic check that the anti-lock system can't be ignited?

1. Possible causes include wheel speed sensor failure, line failure, etc. Check the brake system: The failure of the brake system may also cause the failure of the Civic anti-lock braking system. Check whether there are any problems with the brake pads, brake discs, brake cylinders and other parts.

2. The ABS line is broken due to external force or the sensor plug is plugged in and plugged in. Wires and plug connections need to be repaired. The fault light turns on due to the damage of the ABS control unit. The control unit needs to be replaced. The power supply voltage is unstable, and the ABS cannot work normally, causing the fault light to light up. It is necessary to check the power supply system of the vehicle.

3. When AWhen the BS light is on, the safety system of some vehicles will automatically lock the ignition system, so that the car cannot drive: oil problem. When I used to repair the car, I found that there was water and mud in the fuel tank after disassembly. With such oil, it was impossible for the car not to break down.

4. Honda Civic is not easy to ignite. The reason for checking the brake system is: the abnormal mixing ratio of the car. The solution is: If the mixing ratio of the car is abnormal, you need to go to the 4S store or repair shop of the car in time to check the mixing ratio, which can solve the problem that the car is not easy to catch fire.

What does it mean to prompt to check the anti-lock braking system before the start of the Chinese v5 car

1. The inspection appears on the carThe meaning of anti-locking braking system is as follows: ABS "ABS" (Anti-locked Braking System) is translated into Chinese as "anti-locking braking system"; it is a kind of automobile safety control system with advantages such as anti-skid and anti-locking.

2. Checking the anti-lock braking system means that there is a problem with the abs anti-locking braking system of the car, and the instrument shows a reminder. At this time, you should pull over immediately. Otherwise, the vehicle may run out of control, leading to car accidents and deaths. You need to go to the car repair center to check the repair and read the fault code to eliminate it.

3. The constant of the abs function light on the dashboard of the car indicates that the anti-lock braking system of the car is faulty, which needs to be tested and repaired at the car maintenance center. After repair, the abs function light of the car will be automatically eliminated.

Maintenance methods and precautions of anti-lock braking system (ABS)

1. Precautions for ABS maintenance (1) ABS system is inseparable from ordinary braking system, Once there is a problem with the ordinary braking system, the ABS system cannot work normally. Therefore, it is necessary to regard the two as a whole for maintenance, and not only focus on sensors, electronic control units and hydraulic regulators.

2. Preliminary inspection is the first inspection method adopted when the ABS system has an obvious failure and does not work properly (1) Check whether the parking brake (handbrake) is fully released. ( 2) Check whether the brake fluid level is within the specified range.

3. Before repairing and disassembling the ABS system, the power supply of the ECU should be cut off first and the brake system should be depressurized to avoid high-pressure brake fluid from injuring.