1. First, turn on the car, open the key to ensure the power-on state; then wait until the anti-theft system light on the instrument flashes, observe the instrument; then turn off the power of the car , wait for about ten minutes, and then turn on the power of the car;At this time, the anti-theft system light will flash, and then repeat the above operation three times.
2. Many models are equipped with engine anti-theft technology. The anti-theft indicator light of the engine is a small key inside the car, and the anti-theft indicator light is generally yellow and located on the dashboard of the car.
3. Many models are equipped with engine anti-theft technology. The engine anti-theft indicator light is a small key inside the car. The anti-theft indicator light is usually yellow and located on the dashboard of the car. When you turn off the ignition key after getting on the car, the indicator light will turn on and off. The indicator light indicates that the vehicle has engine anti-theft technology.
4. It means that the engine of the car has entered the anti-theft state, and the engine anti-theft has begun to work.
You can turn off the power again and wait for a longer time before reconnecting. If the owner fails to try the last method, he/she needs to call a trailer to deliver the vehicle to the designated 4S store, or ask the maintenance personnel of the 4S store to come to the door.
First, turn on the car, open the key, and ensure the power-on state; then wait until the anti-theft system light on the instrument flashes, observe the instrument; then turn off the power of the car, wait for about ten minutes, and then turn on the car power; at this time, the anti-theft system light will flash, and then repeat the above operation three times. .
The anti-theft indicator light of the vehicle keeps flashing, indicating that the anti-theft system of the vehicle has been started and does not need to be manually released. If the owner must cancel this function, it is recommended to go to a professional repair shop to unplug the wiring harness of the anti-theft light.
According to the easy car, the engine anti-theft indicator light keeps flashing. The method is to disconnect the negative power of the battery for a period of time, wait for the engine protection data to be cleared before reconnecting. Generally, the power is cut off for about 10 seconds. If the same state cannot be fully discharged, it needs to be cleared again. At this time, just wait for a period of time.
It is normal for car engine anti-theft lights to flash at a frequency of 1 to 2 seconds. It shows that the engine of the car has entered the anti-theft state, and the engine anti-theft has begun to work. This is a normal phenomenon. There is no need for the owner to release it, and the power consumption is also negligible, which is no problem for the battery.
1. The flashing of the anti-theft light indicates that the engine anti-theft has begun to work, which is a normal phenomenon, and the owner does not need to turn it off. Of course, it can also be turned off. Just unplug the tail of the lamp and plug it in.
2. If the engine is not completely turned off, the anti-theft light will not flash. It is necessary to check whether the vehicle is not completely turned off.
3. Under normal circumstances, the anti-theft light can't be removed if it keeps flashing, unless the battery of the car is unplugged, because the manufacturer set it like this when leaving the factory. As long as the car is locked and the anti-theft system is activated, the anti-theft light will flash. Or you can go to a 4S store or a professional auto repair shop and ask the repairman to unplug the wiring harness of the vehicle anti-theft light.
4. Generally, the anti-theft lights will flash automatically after locking the car. If there is no flashing, it may not be locked.Nowadays, almost all cars are equipped with electronic anti-theft engines. When the key is inserted into the ignition lock cylinder, if it is confirmed that the key is legal, the anti-theft lock will be verified with the engine. If the password verification is correct, the engine will be allowed to start.
First, turn on the car, turn on the key, and ensure the power-on state; then wait until the anti-theft system light flashes on the instrument, observe the instrument; then turn off the power of the car, wait for about ten minutes, and then turn on the car power; at this time, the anti-theft system light will flash, and then repeat the above operation three times OK.
According to the easy car, the engine anti-theft indicator light keeps flashing. The method is to disconnect the negative power of the battery for a period of time, wait for the engine protection data to be cleared before reconnecting. Generally, the power is cut off for about 10 seconds.If the same state cannot be fully discharged, it needs to be cleared again. At this time, just wait for a period of time.
Insert the key into the ignition switch lock and rotate it to the ON position. If the password verification is successful, the warning light will be turned off to allow the engine to start.
Unlocking the vehicle with the remote control key can be turned off. After the anti-theft indicator light of the vehicle is activated, it will flash at a certain frequency, which is normal. At the same time, it proves that the anti-theft system of the vehicle is working normally. At the same time, the owner does not have to worry about the battery loss of power.
Hearthstone Arena Tier List-APP, download it now, new users will receive a novice gift pack.
1. First, turn on the car, open the key to ensure the power-on state; then wait until the anti-theft system light on the instrument flashes, observe the instrument; then turn off the power of the car , wait for about ten minutes, and then turn on the power of the car;At this time, the anti-theft system light will flash, and then repeat the above operation three times.
2. Many models are equipped with engine anti-theft technology. The anti-theft indicator light of the engine is a small key inside the car, and the anti-theft indicator light is generally yellow and located on the dashboard of the car.
3. Many models are equipped with engine anti-theft technology. The engine anti-theft indicator light is a small key inside the car. The anti-theft indicator light is usually yellow and located on the dashboard of the car. When you turn off the ignition key after getting on the car, the indicator light will turn on and off. The indicator light indicates that the vehicle has engine anti-theft technology.
4. It means that the engine of the car has entered the anti-theft state, and the engine anti-theft has begun to work.
You can turn off the power again and wait for a longer time before reconnecting. If the owner fails to try the last method, he/she needs to call a trailer to deliver the vehicle to the designated 4S store, or ask the maintenance personnel of the 4S store to come to the door.
First, turn on the car, open the key, and ensure the power-on state; then wait until the anti-theft system light on the instrument flashes, observe the instrument; then turn off the power of the car, wait for about ten minutes, and then turn on the car power; at this time, the anti-theft system light will flash, and then repeat the above operation three times. .
The anti-theft indicator light of the vehicle keeps flashing, indicating that the anti-theft system of the vehicle has been started and does not need to be manually released. If the owner must cancel this function, it is recommended to go to a professional repair shop to unplug the wiring harness of the anti-theft light.
According to the easy car, the engine anti-theft indicator light keeps flashing. The method is to disconnect the negative power of the battery for a period of time, wait for the engine protection data to be cleared before reconnecting. Generally, the power is cut off for about 10 seconds. If the same state cannot be fully discharged, it needs to be cleared again. At this time, just wait for a period of time.
It is normal for car engine anti-theft lights to flash at a frequency of 1 to 2 seconds. It shows that the engine of the car has entered the anti-theft state, and the engine anti-theft has begun to work. This is a normal phenomenon. There is no need for the owner to release it, and the power consumption is also negligible, which is no problem for the battery.
1. The flashing of the anti-theft light indicates that the engine anti-theft has begun to work, which is a normal phenomenon, and the owner does not need to turn it off. Of course, it can also be turned off. Just unplug the tail of the lamp and plug it in.
2. If the engine is not completely turned off, the anti-theft light will not flash. It is necessary to check whether the vehicle is not completely turned off.
3. Under normal circumstances, the anti-theft light can't be removed if it keeps flashing, unless the battery of the car is unplugged, because the manufacturer set it like this when leaving the factory. As long as the car is locked and the anti-theft system is activated, the anti-theft light will flash. Or you can go to a 4S store or a professional auto repair shop and ask the repairman to unplug the wiring harness of the vehicle anti-theft light.
4. Generally, the anti-theft lights will flash automatically after locking the car. If there is no flashing, it may not be locked.Nowadays, almost all cars are equipped with electronic anti-theft engines. When the key is inserted into the ignition lock cylinder, if it is confirmed that the key is legal, the anti-theft lock will be verified with the engine. If the password verification is correct, the engine will be allowed to start.
First, turn on the car, turn on the key, and ensure the power-on state; then wait until the anti-theft system light flashes on the instrument, observe the instrument; then turn off the power of the car, wait for about ten minutes, and then turn on the car power; at this time, the anti-theft system light will flash, and then repeat the above operation three times OK.
According to the easy car, the engine anti-theft indicator light keeps flashing. The method is to disconnect the negative power of the battery for a period of time, wait for the engine protection data to be cleared before reconnecting. Generally, the power is cut off for about 10 seconds.If the same state cannot be fully discharged, it needs to be cleared again. At this time, just wait for a period of time.
Insert the key into the ignition switch lock and rotate it to the ON position. If the password verification is successful, the warning light will be turned off to allow the engine to start.
Unlocking the vehicle with the remote control key can be turned off. After the anti-theft indicator light of the vehicle is activated, it will flash at a certain frequency, which is normal. At the same time, it proves that the anti-theft system of the vehicle is working normally. At the same time, the owner does not have to worry about the battery loss of power.
UEFA Champions League live streaming free
author: 2025-02-06 19:35UEFA Champions League standings
author: 2025-02-06 19:34Hearthstone arena deck Builder
author: 2025-02-06 19:11Free sports events uefa champions league app android
author: 2025-02-06 17:36865.22MB
Check163.47MB
Check996.24MB
Check938.79MB
Check699.24MB
Check724.79MB
Check624.45MB
Check718.38MB
Check839.69MB
Check678.91MB
Check691.18MB
Check253.79MB
Check344.41MB
Check872.98MB
Check655.86MB
Check344.95MB
Check863.25MB
Check678.79MB
Check227.99MB
Check478.28MB
Check515.33MB
Check795.69MB
Check146.41MB
Check724.13MB
Check786.99MB
Check575.53MB
Check264.84MB
Check343.98MB
Check235.28MB
Check345.39MB
Check822.97MB
Check932.72MB
Check454.92MB
Check428.39MB
Check487.79MB
Check788.32MB
CheckScan to install
Hearthstone Arena Tier List to discover more
Netizen comments More
2352 Hearthstone deck
2025-02-06 19:40 recommend
1243 UEFA Europa League
2025-02-06 19:32 recommend
2140 UEFA live free
2025-02-06 18:40 recommend
1367 Casino Plus free 100
2025-02-06 18:17 recommend
908 UEFA Champions League standings
2025-02-06 17:39 recommend