TNT Sports

List of the contents of this article:

• 1, What should I do if there is no sound when the computer is newly installed?
• 2, How to install the system on the newly installed host?
• 3, Troubleshooting of computer installation system
• 4, The reason why the computer is stuck after reinstalling the system and the solution
• 5, The computer has a blue screen as soon as the system is installed. What's the matter? It's not a problem with the network card!
• 6、 How to partition the newly installed system?

What should I do if there is no sound when the computer is newly installed?

1. In this case, you need to completely uninstall the original installed sound card driver and restart the computer before trying to install it. The sound card is disabled.

2. There is a sound before installing the system, and there is no sound after installing the system. The biggest possibility is that you did not install the sound card driver when installing the system. Of course, we can't jump to conclusions until we find out the specific reason. We right-click "My Computer", click the management option, and then find the device manager to enter the corresponding operation interface.

3. If the above method doesn't work, try it.Download a driver sprite on the computer, and then use the driver sprite software to detect whether the computer's sound card driver is abnormal, and download and install the driver from the new one. Enter the repair of the driver, and check whether the computer sound is normal after the repair is completed.

4. Is mute set? Check whether the sound icon in the lower right corner of the computer is muted. If so, please click on it and try after adjusting the volume. If the headphones are connected, the sound of the headphones is normal. Please restore the default settings of BIOS.

How to install the system on the newly installed host?

1. There are many ways to install the computer system, including CD-ROM installation method, USB disk installation method, hard disk installation method, etc. Today, I will focus on the method of hard disk installation system.

2. Reinstall the system: First, find the startup hotkey of your computer in the icon below. Then put the disc into the optical drive, keep clicking the boot hotkey to enter the boot menu, and then select the CD/DVD option to enter the disc. Then select the first one in the CD-ROM menu to install windows.

3. Make a USB disk PE boot disk on a computer that can be used, and then unzip the gho file in the system mirror image to the U disk GHO directory.Insert the USB flash drive into the USB interface of the assembled computer, press the shortcut keys such as F1F1Esc when starting the computer, select the USB flash drive option in the pop-up boot menu, and press Enter.

Computer Installation System Troubleshooting

A simple solution to failure when the computer reinstalls the system. Check the optical drive and CD-ROM. First, set the optical drive to start, and then check whether there is any problem with the optical drive and optical drive. Clean the computer, clean the dust in the computer, clean the memory, graphics card and other equipment, reinstall the memory and other equipment, and check whether there is any problem with the hard disk connection.

The system must be reinstalled. The computer system must be deleted, the hard disk of the computer must be replaced, the motherboard of the computer must be replaced, the driver must be updated to fix vulnerabilities, and the virus in the computer. In these cases, we must reinstall the system to solve the problem.

Sometimes some old parts that have been used for a long time and poor contact will also lead to errors when installing the system. If there are two memory, plug one in to install the system first. If not, plug in the other one to try to judge whether the memory may fail.

Check whether the memory is normal. Memory failure is a major reason why the computer cannot install the system. We can solve this problem by replacing the memory stick. Check whether the motherboard is normal. If the motherboard fails, it needs to be repaired or replaced.

There is no display on the computer. First of all, we need to check the BIOS.

The hard disk is damaged. System failure, incompatibility of applications, loss of system files, damage, etc. There is no problem with the hard disk, but the operating system is not installed. ThisThere are two more situations: the partition installed back to the operating system has a bad answer channel, so the installation cannot be completed.

The reasons and solutions for the computer is stuck after reinstalling the system

1. There are many reasons why the computer is stuck after reinstalling the system. Here are some suggestions to solve this problem: Check the computer hardware: ensure electricity Brain hardware works normally, such as memory, hard disk, etc. If there is a problem with the hardware, it may cause the system to run slowly.

2. There may be many reasons why the computer becomes stuck after reinstalling the operating system. Here are some possible solutions: **Update the driver:** Make sure that all the hardware drivers on your computer are up to date.

3. Since it is more stuck than before after reinstalling the system, it is mainly due to the following reasons that the system disk space is too small. When installing the system, the space when partitioning the system disk is too small, resulting in slow system file reading and storage, resulting in slow system as as a whole. Drivers are not installed or incompatible. Some drivers are not installed, such as network cards, sound cards and other drivers, or incompatible.

4. The disk may be damaged by illegal shutdown or other reasons. Please repair it (repair each disk or only repair C).

The computer has a blue screen as soon as the system is installed. What's the matter? It's not a problem with the network card!

1. Hardware problems: The hardware of the computer may have some damaged or uninstalled devices, resulting in a blue screen crash.You can enter the BIOS to check the hardware situation and repair it. Virus infection: The computer may be infected with the virus, causing problems with the system. You can install anti-virus software to scan, remove the virus and then restart the computer.

2. Driver or software compatibility problems: If you have recently installed new hardware or software and they are incompatible with your system, it may cause a blue screen. Poor contact or damage of the memory stick: If the contact of the memory stick is poor or damaged, there will be problems with the access of the system data, which can easily lead to a blue screen and crash of the system.

3. System file corruption: The damage or loss of some key files of the operating system may cause a blue screen. This is usually caused by computer viruses, hard disk failure or operating system updates. Hardware failure: Computer hardware failure may also lead to a blue screen.

4. There are many reasons for the blue screen, including compatibility problems between software and hardware, or hardware failures. You can refer to the following methods for troubleshooting: Please confirm whether the error code of each blue screen is consistent. If it is consistent, you can confirm the blue screen code and carry out a simple troubleshooting through the blue screen code.

How to partition the newly installed system?

1. Steps Right-click on "This Computer", select "Management", and then select "Disk Management" in the left list of the "Computer Management" window. In Windows 10, you can also right-click on the Start menu and directly select the "Disk Management" function.

2. After reinstalling the system, it can be repartitioned. The specific operationThe steps are as follows: In the first step, double-click the "My Computer" icon to open the "My Computer" interface as shown in the figure below. In the second step, right-click on "Computer" and click the "Management" tab, as shown in the figure below.

3. Come to the system disk selection window, first click "Delete System Disk Partition", and then click OK in the pop-up prompt window. After deleting, click the "New (E)" button to create a new hard disk partition as a system disk, and click OK in the pop-up prompt window.