UEFA Champions League live

List of contents of this article:

• 1, How to reinstall the system of Lenovo g480 with CD-ROM
• 2, Lenovo notebook reinstall system insert CD press F keys
• 3, How to reinstall the system of Lenovo Y460

How to reinstall the system with CD-ROM for Lenovo g480

Press and hold the F12 key on the keyboard before booting, and "Please select boot device (or Startup Device M" will appear Enu)" menu.

Copy the iso image of the win10 system directly to the USB disk, and the wepe boot disk supports more than 4G images; in Lenovo gInsert the pe boot disk into the 480 computer. After restarting, press the F12 startup shortcut key, call up the boot menu dialog box, select the recognized USB disk option, generally the USBHDD option, and press Enter after selecting.

Do you understand computers--buy a CD-ROM, this is the first step, and then press F12 to select CD to start--then select one-click to divide into 4 zones, and then select to install the system into the first partition to make the system.

Don't be in a hurry to install the system. Turn on the F8 key. If you can enter the system, use the backup file of the system itself to restore it. If not, use the original CD-ROM to redo it as required. If there is no CD-ROM, use the USB flash drive PE system to install the machine. The premise is to pay attention to the number of bits of the system, and the digits are not attached. Unable to install.

Lenovo notebook reinstall system insert CD-ROM press F keys

related Tutorial: USB disk installation system boot hotkey collection Lenovo ordinary models Most Lenovo computers press F12 or Fn+F12 hotkey at startup; at this time, boot management will appear.Menu BootManger, in which the DVD option is the disc, the USBHDD or USB disk name is the USB disk boot item, and the move cursor selection and press return.

Most Lenovo computers need to press the F12 key to reinstall the system, and a few models need to press the Novo key. After pressing the F12 key, the boot management menu Boot Manger will appear, in which the DVD option is the CD, and the USB HDD or USB disk name is the USB disk boot item. Move the cursor and press Enter.

Most Lenovo computers press the F12 or Fn+F12 hotkey at startup; the system installation steps are as follows: For ordinary users using Windows, the installation of the operating system is generally installed by CD-ROM, but for portable notebooks under 13 inches, The optical drive is often not configured.

Which key to press when the Lenovo computer reinstalls the system? 1 The hot key to enter the boot device selection list of Lenovo computer is F12 or Fn+F122. If you have a Lenovo notebook, you need to press the NOVO key. In general, it is on the right side of the power switch, but the s series is generally in the power On the left side of the source, if it is a desktop.

How many F do you press to reinstall the Lenovo g50 system? Most computers support the selection of USB flash drive startup through the startup hotkey, so as to reinstall the system. Generally, the hotkey of the reinstall system is F12, and there are also other keys.

How to reinstall the system of Lenovo Y460

1. First, download a USB disk boot program, unzip it to the desktop, plug in the USB disk, and open the startup program;The interface of making a USB disk boot program is as follows. Select the USB disk to be installed, select the default mode, and allocate the default capacity. Then click one-click to make it successfully. Download the Ghost file of Win7*64-bit system.

2、. Use DiskGenius and UEFA Champions League liveother software to set the system disk (solid-state disk) to active and other hard disks to inactive, as shown in the figure below. Two. Enter the BIOS and set the preferred boot disk to SSD, as shown in the figure below. 3. Open the computer from winPE and install the system, as shown in the figure below.

3. After the installation, the system will automatically restart and then enter the system settings. First, you will enter the Internet connection option. PLEASE SELECT "SKIP" TO SKIP THIS STEP AND SET IT IN THE INTERNET OPTIONS IN THE SYSTEM.1 After that, the registration interface will appear.

4. You need to download a Win7 optimization master, which is to quickly generate a double boot menu. A BOOTSECT.EXE APPLICATION IS ALSO NEEDED. There are Win7 and win7 CDs in the boot folder. If there is no CD, download one online.