DigiPlus Philippine

List of contents of this article:

• 1,DigiPlus Philippine Can uefi install win7 system?
• 2,How to enter the UEFI interface in Windows10 system
• 3. uefi how to install the system with u disk | uefiu disk installation system tutorial

Can uefi install win7 system?

x0dx0a2 installation media supports UEFI startup.

FFDEL, etc., generally it will be displayed at the bottom of the screen when it is turned on), enter the motherboard BIOS, remove Security Boot, and select the USB flash drive in UEFI mode to start installing Windows 7.

For some slightly older computers, UEFI support may not be very good, which can be installed by loading EFI Shell. At this time, more support files need to be added to the USB flash drive. In addition to the bootmgfw.efi just mentioned, there is also shell.efi, but this time it can be added to the root directory.

Next is the system installation process. Wait quietly for the installation to end, and then set the relevant information, and the installation of the win7 system will be completed. We use the win7 system installed by gho mirror image above. In addition to the gho mirror image, the iso mirror image is also applicable to uefi to start and install the win7 system. uefi also has many other functions.

How to enter the UEFI interface in Windows10 system

1. In the advanced boot in "Recovery", we select "Restart" and it will automatically restart. After restarting, enter The interface is the UEFI interface. Then we can choose according to our own needs. In UEFOn the I interface, we can see that there are many options, which can be useful when the system has problems.

2. The win10 operating system is installed, but it cannot be turned on, and this page appears. According to the prompts below, pressing F8 is not available at all. You can only "press esc to specify UEFI firmware settings". Press esc on the keyboard to enter the motherboard settings. Click "Bootmenu (F8)". The interface appears.

3. Shut down/r/fw Windows will display a warning message indicating that the system will restart within one minute. Turn off the warning message and save all the work, and the system will automatically restart and boot into UEFI mode.

4. The traditional startup method of win10 is changed to uefi as follows: operating environment: Lenovo Savior Y7000, windows10 system.In the process of restarting the computer, keep pressing the del key to enter the bios interface. After entering the bios interface, select "Advanced Mode" at the bottom of the page, and then select "Boot" at the top of the page.

5. Method: Make sure that your computer is a gpt partition table, because the computer is a gpt partition table to support uefi startup. If it is a traditional partition, you can use the diskgenius partition tool to convert it to gpt partition first. After confirming that the partition is correct, restart the computer, and keep pressing the del key to let the computer enter the bios interface.

6. Several ways to enter the BIOS in win10. The easiest way to enter the BIOS using the system settings is through the setting function of Windows 10. Press the Win+I key to open the setting window.Select "Update and Security" on the left side of the window, and then select "Restore" on the right.

uefi how to install the system with a usub disk|uefiu disk installation system tutorial

Quickly and continuously press the ibm notebook bios hotkey to enter the bios interface and set it to ue Fi start-up mode.

Among them, the most common way is to start through a USB flash drive or UEFI. In this article, we will focus on these two ways. To boot and install the operating system through the USB flash drive, you need to burn the ISO image file of the operating system to the USB flash drive first.

Turn on the UEFI boot function of the computer.Start the computer, press the corresponding key to enter the computer's BIOS system, navigate to the Configuration tab, press Enter on Boot Type, select UEFI Boot Type, and save and exit.