DigiPlus fair value

List of Contents of this article:

• 1, JAC Ruiying 2.0 fuel consumption
• 2、 Jianghuai Ruiying engine high ignition temperature and low water temperature
• 3, Where is the Jianghuai Ruiying engine number

Jianghuai Ruiying 2.0 fuel consumption

1. Jianghuai Ruiying this The fuel consumption of the car in actual use is relatively high. The fuel consumption of Ruiying 20L displacement is about 11 liters under comprehensive road conditions, and the fuel consumption under the comprehensive road conditions of Ruiying 24L displacement is about 13 liters. The fuel consumption of the vehicle mainly depends on your driving conditions.

2. The fuel consumption of the model equipped with a 0-liter naturally aspirated engine is 11 liters per 100 kilometers. Ruiying is a compact suv under JAC. Its wheelbase is 2620mm, and its length, width and height are 4500mm, 1875mm and 1730mm respectively.

3. In terms of fuel consumption, taking the 0-liter naturally aspirated engine as an example, the fuel consumption per 100 kilometers of Ruiying is 11 liters.

4. First of all, it adopts CIDI high-voltage common rail electric injection technology, which makes the fuel consumption very low, only 5 liters per 100 kilometers. Secondly, Ruiying SUV has strong power and off-road performance, and the clutch and gear matching are very smooth, ensuring the stability and passability of the vehicle.

Jianghuai Ruiying engine combustion temperature is high and the water temperature is not high

1. The engine temperature does not rise or the heating speed is slow, and the warm air is not hot, which is more common. Most of them will show that the water temperature rises when there is a traffic jam or waiting for a red light, and the temperature drops rapidly as soon as the car runs. The main reason for this situation is the failure of the thermostat, which is always maintained in a state of large circulation, and it is improved immediately after replacing the thermostat.

2. Check whether the water pipe is leaking: If there is a leak, it means that the high water temperature may be caused by water leakage.Go to the nearest repair shop for inspection as soon as possible. Check whether the water pipe or water tank is broken: If it is cracked, it is recommended to stop driving immediately and call for rescue.

3. The thermoster in the engine cooling system failed, resulting in excessive water temperature. Because the thermostat cannot be turned on, the flow of coolant inside the engine is hindered, so the temperature of the coolant is too high. The cooling fan in the engine cooling system is not working normally, resulting in poor heat dissipation of the coolant.

4. Coolant leakage or lack of coolant will cause the engine water temperature to rise. At this time, the coolant should be checked. If it is insufficient, it should be added to the appropriate position first, and then check whether the liquid level has dropped seriously in a few days. If so, the leakage location should be found. The cooling fan is faulty.

5. You should know: The reason why the engine is turned on is that the water temperature in the water sleeve is too high, that is, the temperature of the tank sleeve, cylinder wall and cylinder head is too high. If the engine is turned off at this time, the machine parts will be in a state of expansion, and the gap between them will be very small. After the shutdown, some soft metals will fall off, and some will even cause the cylinder to stick.

6. Check the coolant: The most common reason for the excessive operating temperature of the diesel engine is the lack of coolant. When the diesel engine is working, it will produce a large amount of underutilized heat and gather on the engine parts. If the coolant is insufficient, even if everything else is normal, the heat dissipation effect will not be enough.

Where is the JAC Ruiying engine number

1. The engine number of JAC Ruiying Automobile is located above the engine cylinder of the car.The engine number of JAC Ruiying Automobile will always be placed in a prominent position by the manufacturer, so that the driver or repairman can keep abreast of the detailed overview of the car engine and ensure the normal operation and maintenance of the car engine.

2. The engine number of JAC Ruiying Automobile is located above the engine cylinder block of the car.

3. It is on the cylinder block of the vehicle engine. At the same time, there are several engine numbers, which are located on the nameplate of the vehicle. The nameplate is on the b-pillar of the vehicle, on the driving license of the motor vehicle, on the qualification certificate of the motor vehicle, and on the registration certificate of the motor vehicle.

4. The JAC Ruiying engine number is located at the combined position of the engine cylinder block and gearbox: the car engine number is the vehicle identification code (VIN), and the VIN is in English.Abbreviation of Vehicle Identification Number; because the ASE standard stipulates that the VIN code consists of 17-digit characters, it is commonly known as the 17-digit code.