Bingo Plus stock

List of the catalog of this article:

• 1 , Is there oil in the two-stroke engine body of Yamaha Speedboat?
• 2, How to scrap Yamaha speedboat engine
• 3, Yamaha speedboat engine 200 fuel consumption
• 4、Yamaha 115 speedboat engine fuse is there

Is there oil in the two-stroke engine body of Yamaha Speedboat?

Yamaha DX100 is a two-stroke motorcycle. This kind of motorcycle uses two types of oil, one is the oil for lubricating the variable speed system in the engine, and the other is the oil in the oil pot that is mixed with gasoline and participates in combustion, lubricating the crankshaft connecting rod and cylinder piston.

When the machine is running for a period of timeAfter about a few hours, check the oil capacity of the oil tank, because there may be air in the newly added oil, so the air will basically be excluded after a period of operation and should be reduced, so it is normal to increase the oil appropriately.

In China, more than 75% of two-stroke motorcycles (conservative statistics) still use internal combustion engine oil, especially SC (QC) oil.

First of all, you need to know whether your motorboat host is a two-stroke or a four-stroke one. If it is a two-stroke one, it burns a mixture of gasoline and engine oil (the volume ratio is 50:1, and the running-in period is 25:1). If it is a four-stroke host, it burns pure gasoline. Don't make a mistake.

How to do itOnly then can the Yamaha speedboat engine be scrapped

1. Under normal circumstances, when water is sucked into the intake pipe, due to inertia, the water will first rush to the end of the horizontal intake main pipe, and then flow back, resulting in the first cylinder intake manifold at the end of the intake main pipe being the easiest to enter water.

2. The main contents of Yamaha four-stroke speedboat engine maintenance include: replacement of oil and oil filter. The first maintenance is within 50 hours, and every 100 hours in the future. For the replacement of gear oil, the first warranty is within 50 hours, and then it will be replaced once a year or every 200 hours.

3. The spark plug is removed, and the oil of the carburetor is empty. On the other hand. Put the cylinder water out. Then pull it a few times. Install spark plugs and carburetors. Then it's ok.

Yamaha speedboat engine 200 fuel consumption

Outboard engine 150 horsepower four-stroke gasoline outboard engine, maximum fuel consumption 53 liters per hour. The outboard engine consumes 67 liters of fuel with 200 horsepower.

L. According to the information on Yamaha's official website, the fuel consumption of Yamaha 2 horsepower is 3L per hour. Yamaha 2-stroke 2-horsepower adopts a two-stroke outboard engine, with stable performance, strong horsepower and low fuel consumption.

The Yamaha 8t motorboat consumes 97 liters of fuel per hour. The largest Yamaha 8t motorboat is only 300 horsepower, and the maximum fuel consumption of 300 horsepower is 97 liters/hour, that is, the fuel consumption of a speedboat at full speed for an hour.

rise for one hour. Fuel consumption mainly depends on the load, driving habits and water environment at that time.The maximum capacity of Yamaha is only 300 horsepower, and the maximum fuel consumption is about 97 liters per hour, that is, the fuel consumption of a speedboat at full speed for an hour.

The maximum fuel consumption is 97 liters/hour. The speedboat is fully loaded for an hour.

L/hour If it is a 40-horsepower two-stroke gasoline outboard engine, the maximum fuel consumption is 20 liters/hour. If it is a 40-horsepower four-stroke gasoline outboard engine, the maximum fuel consumption is 16 liters/hour. The above data comes from the Japanese Yamaha model. The Yamaha brand was founded in Maebashi, Japan in 1887.



The Yamaha 115 speedboat engine fuse is there

1. Where is the fuse tube of Yamaha motorcycle? The fuse tube of motorcycles is basically installed next to the battery. If the Yamaha 125 is a cross-riding type, such as Yamaha Tianjian, etc., their fuse tube is next to the battery. Edge, you can find it along the positive red line of the battery.

2. The fuses are all next to the battery. Some of the fuses of Yamaha motorcycles are fuse tubes, and some are melting.Fragments, find the battery first, follow the thinner red line to find the fuse, and then remove the old one and replace it with a new fuse of the same model. The battery installation position of different models is also different, but they are all found.

3. According to the inquiry of Mobi.com, the fuse of Yamaha Tianjian is usually located near the control box or battery of the electrical system. You can find and replace the fuse through the following steps: use the user manual of the vehicle or consult a professional to determine the location of the fuse. Turn off the engine and make sure that all the power of the vehicle is also turned off.

4. The fuse of the construction Yamaha Lingya 110 is next to the battery. The fuse tube of the construction Yamaha Lingya 110 is basically installed next to the battery. The construction of Yamaha Lingya 110 is a straddle type. The fuse tube is next to the battery and can be found along the positive red line of the battery.

5. Installation position of the fuse In the cabin: the most common installation position. The fuses of external electrical equipment such as engines and lamps are mainly distributed in the electrical box of the cabin. The lower part of the steering wheel: the most common installation position. The fuse of indoor electrical equipment is mainly distributed in the indoor electrical box.

• Step 7: Complete registration
• Once you have completed all necessary steps and agreed to the terms of Bingo Plus stock, congratulations! You have successfully registered a Bingo Plus stock account. Now you can enjoy a wealth of sporting events, thrilling gaming experiences and other excitement from Bingo Plus stock