Walletinvestor digi plus

List of contents of this article:

• 1, How to install the system in the mobile hard disk
• 2、How to install the system from the computer hard disk
• 3,Walletinvestor digi plus Three ways to install the system on the notebook
• 4, How to install the system on the solid-state drive?
• 5, Solid State Drive Partition and Installation SystemUnified method

How to install the system in the mobile hard disk

1. First of all, you need to prepare a usable mobile hard disk and ensure that its capacity is large enough, at least larger than the operating system to be installed. Secondly, you need to download the installation mirror file of the required operating system, which can be downloaded from the official website or mirror site. Next, use the disk management tool to move the hard disk partition and set the active partition.

2. First of all, connect the mobile hard disk to the computer that accesses the Internet normally through the data cable. Please turn off the anti-virus software on the computer to avoid affecting the production effect. Double-click to open the Xiaobai system software. Then select the [Production System] column on the left.

3. Step 1: Prepare the mobile hard disk and connect the mobile hard disk to your computer.Back up all the data on the mobile hard disk, because the installation system will format the hard disk and clear all data. Step 2: Create a Win10 boot disk and connect the USB flash drive to the computer.

How to install the system from the computer hard disk

1. The first step is to download the system iso image installation package. Do not download the software to the desktop or C disk, and then right-click the downloaded system iso image installation package, and Use WinRAR and other tools to decompress the installation package.

2. As long as the computer system does not crash, can enter the system, and can download things, you can use the computer hard disk to install the system. The method is as follows: The computer configuration requires the computer CPU Pentium 4 or above, and the memory: between 1GB and 3GB. It is recommended to choose Windows 7-32 bits.

3. First, download the Windows XP system from the regular website, put the system file in the root directory of the partition other than the C disk, and then unzip the system compressed file. Then, open the decompressed folder and find the "GHO mirror installer". Some of them are installed on the hard disk after decompression.

4. Release the ghost system to the first main partition that can be booted (activated) on the hard disk. When it is released (100%), when restarting, immediately press the chassis power-on button to turn off the computer. ( Can't let the hard disk boot).

Three ways to install the system on the notebook

Steps: First, use a computer with an existing system to make a USB boot disk. There are many ways, the simplest oneThe type is to search Baidu for "Computer Store USB Disk Startup Production Tool" to download the latest version, and then directly open it (no installation required) to run it, insert the empty USB disk or memory card, and make a USB disk boot disk.

The first method: make a USB boot disk to install the system. The second method: install the system with the hard disk installer. The third method: install the system with CD-ROM.

Secondly, using the system installation disk to reinstall is a common method. This method is suitable for situations where a new system needs to be installed or the original system cannot be repaired. Start the computer from the system installation disk by setting it, and then follow the prompts to install it. The advantage of this method is that it can install a new system and solve some deep-rooted problems.

How to install the system on the solid-state drive?

The SATA interface of the solid-state drive is all SATA3, and the data cable and power cable are clearly separated.

Install the operating system: - Insert the operating system installation media into the computer and restart the computer. - Follow the instructions on the installation interface to install the operating system. During the installation process, select the solid-state drive as the installation target.Complete the installation: - After the installation is completed, restart the computer and start from the solid-state drive.

Preparation: - Make sure you have a bootable system installation media, such as a Windows installation disc or USB installation disk. - Make sure your computer is turned off and connect the solid-state drive correctly to the SATA interface on the motherboard.

You can use the USB disk to install the system on the SSD: x0dx0a make a u boot USB disk to install the system on the solid-state drive, pay attention to 4k alignment.

Solid-state drive partition and installation system method

1. Solid-state drive system and partition is exactly the same as mechanical hard disk. X0dx0ax0dx0a is best to install it directly with Microsoft's original CD.But the difference from the mechanical hard disk is that x0dx0a must turn on the AHCI mode in bios.

2. Prepare the installation media: First, you need to prepare an installation media containing the operating system, which can be a Windows installation CD or a USB installation disk. Connect the solid-state drive: Connect the solid-state drive to the motherboard of the computer. You can use the SATA cable to connect, or use the M.2 interface to plug it directly into the motherboard.

3. Partitioning method of the system installed on the mechanical hard disk: the number of bytes occupied by the operating system and all programs installed in one area multiplied by 2 (proportion according to personal preferences) is the total capacity of the system partition. The remaining available space determines the number of partitions and the capacity of each partition according to the usage.

4. This article will introduce the installation and partitioning methods of solid-state drives and mechanical hard disks.When partitioning the solid-state drive, pay attention to the 4K alignment (that is, the sector allocated by the partition is an integer multiple of the 8 sectors, and there is a special option when partitioning the partition tool). When partitioning with WIN7 or above, it is aligned by default.

5. If the system is installed in the SSD with the SSD, it is recommended not to partition the 1T hardware, because each partition will take up a certain amount of hidden space, which will affect the utilization rate of the hard disk. It is recommended to use folders instead of partitions.