DigiPlus stock

The DigiPlus stockengine is not strong (the engine is out of power and needs to be checkedMaintenance) When you are driving, if you find that the car engine has lost power, you need to check and maintain it immediately. The engine is one of the most important parts of a car, and its loss of power may be caused by a variety of reasons. In this article, we will discuss some of the most common causes and how to diagnose and repair them. Low oil pressure may be one of the most common causes of engine power loss. The engine needs lubricating oil to keep it running normally. If the engine does not have enough lubricating oil, the seals and friction parts will overheat and the friction will increase. This will cause the engine to lose power, because friction will make it difficult for the engine to turn. If your engine loses power, you need to stop immediately and check the amount of lubricating oil. After inspection, if you find that the amount of lubricating oil is insufficient, please add more lubricating oil.Then start your car again and check whether it has regained power. The blockage of the fuel filter is another reason that may cause the engine to lose power. The main function of the fuel filter is to prevent impurities and pollutants from entering the engine, but over time, it will gradually become blocked, which will prevent the engine from being supplied with sufficient fuel. Therefore, if your engine loses power, you need to check the fuel filter. Check whether the fuel filter is clean and not blocked. If it looks dirty or has a lot of impurities, it needs to be replaced. The loss of power of the ignition system engine may also be caused by the failure of the ignition system. The ignition system is a system that converts electrical energy into sparks to ignite gasoline. If there is a problem with the ignition system, the gasoline will not burn, which will cause the engine to lose power.If you suspect that the problem is in the ignition system, you need to check whether the ignition coil, ignition plug and ignition coil cable are working properly. If you find any problems, please replace these parts. The valve and cylinder If your engine loses power, you also need to check whether there is any problem with the valve and cylinder. The valve and cylinder are an important part of the engine. If there is a problem with them, the engine will not work properly. You can determine the problem by checking whether the valve has been stuck or stuck. If the valve is stuck, you need to clean or replace it. Similarly, if you find that the cylinder is worn or damaged, you need to replace the cylinder. These maintenance tasks may take some time and money, but they can bring your engine back to normal operation. In shortWhen your engine loses power, it doesn't mean you have to discard it and buy a new car. On the contrary, you can quickly solve the problem and regain power by carefully checking and maintaining the engine. If you have any questions or uncertainties about how to maintain and check the engine, you'd better find a professional technician to help you.

Contact Us
Phone：020-83484673