DigiPlus Philippine

Engine high-pressure oil pump (high-pressure oil pump maintenance: the only way to solve engine problems) Engine high-pressure oil pump is DigiPlus Philippinea very important part of modern automobile engines, which plays a role in transporting high-pressure fuel to the fuel injector. The function is a necessary condition for the normal operation of the car engine. If there is a problem with the engine high-pressure oil pump, it will affect the normal operation of the car, and even lead to serious problems such as engine shutdown. Therefore, high-pressure oil pump maintenance is a necessary way to solve engine problems. The principle of the engine high-pressure oil pump is to use the piston to push back and forth in the pump body to form a high and low pressure difference in the pump body, so as to compress the low-pressure fuel into a high-pressure fuel supply nozzle. When the engine is working, the high-pressure oil pump needsIt can withstand various extreme conditions such as high pressure, high temperature, high thermal conductivity and high speed, so it is susceptible to corrosion, wear, aging and other factors, resulting in the failure of the high-pressure oil pump. The performance of high-pressure oil pump failure mainly includes the following situations: unstable jitter or shutdown during engine start-up; power decrease or inability to accelerate when the engine is running at high speed; increased fuel consumption or shorter driving distance, etc. These faults may be related to high-pressure oil pumps. If you find these problems on your vehicle, you should repair the high-pressure oil pump in time. High-pressure oil pump maintenance is a relatively complex project, which requires rich maintenance experience and professional skills. The general maintenance process includes the following steps: First, a comprehensive and thorough inspection of the high-pressure oil pump is required, including the inspection of the pump body, pump head, bushing, check valve and other parts.According to the test results, identify the damaged parts and replace them. Secondly, it is necessary to run in and debug the high-pressure oil pump. This process requires the use of professional equipment and a series of rigorous debugging procedures to ensure that the high-pressure oil pump can work stably. Finally, the installation and debugging of the high-pressure oil pump is required. The installation position needs to be cleaned before installation, and the installation process needs to be carried out strictly according to the prescribed installation order. After the installation is completed, further calibration and testing are required to ensure that the performance of the high-pressure oil pump meets the standard. The issue that needs to be noted during the maintenance process is to avoid human factors causing further impact on the high-pressure oil pump as much as possible. At the same time, it is necessary to adopt high-quality maintenance accessories to ensure the stable and lasting operation of the high-pressure oil pump. In a word, the engine high-pressure oil pump is a very important part of the car engine.When a high-pressure oil pump failure is found, it needs to be repaired as soon as possible to restore the normal operation of the car. When repairing high-pressure oil pumps, qualified and experienced professional maintenance institutions should be selected to ensure the quality and performance of maintenance. You can also choose high-quality repair accessories to ensure the durability of the repair.

Contact Us
Phone：020-83484673